| |
| I. |
LENGTH: |
| |
| |
A. 24" -- "I" Model |
| |
B. 48" -- "L" Model |
| |
| II. |
HEIGHT: |
| |
| |
A. 55" |
| |
| III. |
DEPTH: |
| |
| |
A. 82" |
| |
| IV. |
COMPARTMENT CONSTRUCTION: |
| |
| |
A. 16 ga. galvanneal steel "wrapper" (1) piece |
| |
B. 16 ga. galvanneal steel end panels and top insert |
| |
C. Full length rub rail section and drip mold |
| |
| V. |
DOOR CONSTRUCTION: |
| |
| |
A. 16 ga. galvanneal steel door panel -- 1 piece construction |
| |
B. Hat section reinforced at door lock |
| |
C. Full length hinge with stainless steel pin |
| |
D. "T" handle twist door latch |
| |
E. Full perimeter uninterrupted automotive type door seal |
| |
F. Cable type door retainer |
| |
| VI. |
PAINT: |
| |
| |
A. Pre-Paint Preparation |
| |
| |
1. All product surfaces cleaned and conversion coated with high
pressure/high temperature power wash system (Fremont
Industries 608PF) for maximum intercoat adhesion and added rust
and corrosion protection. |
| |
2. All galvanneal surfaces where grinding is required (e.g. to dress
weld) receive a vinyl wash primer coating (.5 - 1.0 mils dry build)
for added rust and corrosion protection and superior adhesion
(Sherwin-Williams E2-G973). |
|
| |
B. Primer |
| |
| |
1. Two component high solid white primer sealer (Sherwin-Williams
"Prime Shield" SCPO41PA) cured with VIC amine generator
licensed through Sherwin-Williams, DFT 1.5 - 2.0 mils. |
|