| |
| I. |
DIMENSIONS: |
| |
| |
Lengths: 9'6", 10'6", 12'6", 14'6" |
| |
Widths: 96" |
| |
| II. |
FRONT OUTRAIL: |
| |
| |
A. 4" deep. |
| |
B. Structural channel |
| |
C. Four 7 GA. (.179) stake pockets sized for standard 2" x 4" lumber. |
| |
D. Gusseted to the runsills. |
| |
| III. |
SIDE OUTRAIL: |
| |
| |
A. 4 2" deep integral 7 GA. (.179") formed with flooring. |
| |
B. 7 GA. (.179) stake pockets sized for standard 2" x 4" lumber - the number of pockets
varies with the length of the platform, pockets on 24" centers. |
| |
C. 3/8" x 3" banding rail. |
| |
| IV. |
REAR OUTRAIL: |
| |
| |
A. 4" deep. |
| |
B. Structural channel |
| |
C. Four 7 GA. (.179) stake pockets sized for standard 2" x 4" lumber. |
| |
D. The outer stake pockets are centered 15 3" from the outer edge of the platform, the
inner stake pockets are centered 39 3" from the outer edge of the platform. |
| |
E. 3/8" x 3" banding rail. |
| |
F. Gusseted to the runsills. |
| |
| V. |
FLOOR AND UNDERSTRUCTURE: |
| |
| |
A. 3" structural channel cross sills |
| |
B. Cross sills on 16" centers |
| |
C. Gusseted at every other cross sill and on the front and rear outrails. |
| |
D. 6" structural channel runsills |
| |
E. Floor options: |
| |
| |
1. Smooth Steel |
| |
- 7 GA. (.179) smooth steel, formed 2 piece welded seam; welded
directly to 3" cross sills. |
| |
- 10 GA. (.135) smooth steel, formed 2 piece welded seam; welded
directly to 3" cross sills. |
| |
2. Treadplate Steel |
| |
- 1/8" (.125) treadplate steel, formed 2 piece welded seam; welded
directly to 3" cross sills. |
|
| |
| VI. |
PAINT: |
| |
| |
A. Black rust inhibitive primer. |
| |
B. Black alkyd enamel topcoat paint. |
| |
| VII. |
WEIGHTS: (approximate) |
| |
| |
A. 9' 6" x 96"………………………….1,063 lbs. |
| |
B. 10'6"x96"..…………………………1,139 lbs. |
| |
C. 12' 6" x 96"………………………..1,375 lbs. |
| |
D. 14' 6" x 96"………………………..1,595 lbs. |
| |
| VIII. |
STEEL RACK SECTIONS: |
| |
| |
A. 40" rack heights standard, with swing out rear racks. (See the steel rack specification
section for complete steel rack information). |
| |
B. 40" tall steel bulkhead is optional instead of front rack sections. (See bulkhead
specification section). |
| |
| IX. |
LIGHTING: |
| |
| |
A. Rubber grommet mounted; high impact, reflective lense clearance lights at corners. |
| |
B. 3 light (identification) cluster shipped unattached. |
| |
C. Plug-in wire harness. |
| |
D. Weather tight installation. |
| |
E. All reflective lights meet applicable federal standards (FMVSS 108). |